Home»Products »Special AC Drive » 新利18备用网址-新利18备用网址-18luck新利客户端下载

新利18备用网址-新利18备用网址-18luck新利客户端下载

ALPHA6200 series special AC drive for textile machinery is independently developed by ALPHA Company. ALPHA 6210/6210S jet loom special drive realizes adjustmentof motor rotation speed only by varying the output frequency, thus no longer needs belts switching or any change on equipment. The production efficiency can be increased by over 15%.

Feature Specification Selection Guide Download

Technical Characteristics

Step-lessspeed regulation, easily and efficiently solve the difficulty of speedregulating on textile machinery

Save accessories and manpower for belt-changing and adjusting, highly raise production efficiency

Unique super start control speeds up the start and eliminates the original star-delta transformation device, saving the cost.

Self-contained JOG function makes jet loom jog operation faster and easier.

Self-contained MODBUS communication protocol can directly communicate with the control systemof jet loom thus eliminates the problem of complicated wiring.

Easy operation and maintenance which can be done by common workers.

Save energy by 5%-15% at low rotational speed.

Applications

The special AC drive is commonly used in textile machinery, air-jet looms, and more.

Technical Specifications of ALPHA6200/6200S/6200V

Item
Specification
Power Range
380V ±20% three phases: 18.5kW
Rated Input Voltage and Frequency
220V three phases: 50/60Hz
Allowable Input Voltage Range
380V three phases: from 304 to 456V, Voltage unbalance rate of less than 3%, Frequency fluctuation of below ±5%
Rated Output Voltage
From 0 to rated input voltage
Max. Overload Current
G model: 150% for one minute, 180% for 20 seconds
P model: 120% for one minute, 150% for one second
Control Method
V/F control, Open loop vector control, Close loop vector control
Frequency Range
From 0.00 to 650.00Hz (from S21R5GB to 3004GB)
From 0.00 to 400.00Hz (from 35R5GB/37R5PB to 3500G)
Frequency Accuracy
Digital command ± 0.01% (from -10℃ to +40℃)
Simulation command ± 0.01% (25℃ ± 10℃)
Preset Frequency Resolution
Digital command 0.01Hz
Simulation command 1/1000 of the maximum frequency
Output Frequency Resolution
0.01Hz
Preset Frequency Signal
From 0 to 10V, from 0 to 20mA
Acceleration-Deceleration Time
From 0.1 to 3600 seconds (The acceleration and deceleration time are set individually.)
Braking Torque
The additional braking resistance reaches up to 125%.
Voltage-Frequency Characteristics
There are 4 fixed V/F characteristics for option, and any V/F characteristic can be preset. The V/F control with PG is provided.
Protective Functions
Over-voltage, under-voltage, current limit, over-current, overload, electronic thermal relay, overheating, over-voltage stall, load short circuit, grounding, under-voltage protection, input phase loss, output phase loss, short circuit to ground, interphase short circuit, motor overload protection, etc
Ambient Temperature
From -10℃ to +40℃
Humidity
From 5 to 95% RH (No condensation)
Storage Temperature
From -40℃ to +70℃
Service Place
Indoor (without any corrosive gas)
Installation Site
The altitude is at most 1,000m. There is not any dust, corrosive gas, or direct solar radiation.
Vibration
Less than 5.9m/s2 (0.6g)
Protection Rating
IP20
Cooling Method
Natural cooling or forced air cooling

ALPHA6200/6200S/6200V Selection Table

Voltage Classes
Model

(Flux Vector)
Model
(Open Loop Vector Control)
Model
(CloseLoopVector Control)
Motor Power (kW)
Rated Current (A)
380V Three Phases
6200-3018G/3022P
6200S-3018G/3022P
6200V-3018G/3022P
18.5/22
37/45

Overall Dimension of ALPHA6200 Series Special AC Drive for Textile Machinery

Note: The ALPHA6200, ALPHA6200S and ALPHA6200V products of the same power have the same overall dimensions.

Model
H
H1
W
W1
D
D1
D2
d
6200-35R5GB/37R5PB
270
255
190
175
176
186
122
7
6200-37R5GB/3011PB
Brochure
ALPHA6200 Series Special AC Drive for Textile Machinery
Solutions
Application of ALPHA6210 Inverter in Air Jet Loom

Related Names
Textile Industry Drives | Stepless Speed Controller | Power Control Equipment

Feedback Form
X